REFLECTOR: Cabin Heat - Damper Install

Ruben Creus ruben at vainneg.com
Mon Jan 16 00:03:54 CST 2012


John, 

Would this also allow you to keep air flowing into the cooler while on the
ground on a hot day? If that were the case then you kill to birds with one
stone!

Ruben

-----Original Message-----
From: John Dibble [mailto:aminetech at bluefrog.com] 
Sent: Sunday, January 15, 2012 8:06 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Cabin Heat - Damper Install

This 3rd pic is of the blower which sits on top and partly inboard of
the naca.  The blower is a 3" bilge blower.  Even though the door is a
close fit, a lot of air escapes by it because there is a lot of
resistance going through the cooler.  That may be the reason others
aren't getting enough heat with the blowers.  A perfect seal is needed
to get all the air to go through the cooler.

John



More information about the Reflector mailing list