REFLECTOR: N173VS RPM
sbjknox
sbjknox at earthlink.net
Wed Feb 22 00:23:07 CST 2012
----- Original Message -----
From: "Geoff Gerhardt" <geoff at thegerhardts.com>
[snip]
> I moved the fuel pressure tap to the fuel divider.
> My fuel and oil pressure sensors are mounted on a
> manifold on the firewall with copper tubes running to
> the pressure tap points. When I turned on the fuel pump,
> I did see a pressure reading from the fuel pressure sensor,
> but because the one injector was leaking, it was not
> building up much pressure. We'll see when I put the
> repaired injector line back in...
> Geoff
Geoff, if you did this just for a test, ok, but I don't think that
at the fuel divider is the proper point to measure system fuel
pressure under normal operating conditions. (This comment assumes
that you have one of the ancient Bendix fuel injection systems... if you
have something else, please disregard this message.)
Sid Knox
Oklahoma
Velocity 173 RG N199RS
Starduster N666SK
KR2 N24TC
W7QJQ
More information about the Reflector
mailing list