REFLECTOR: Cowling Attachment

Mark Magee edjonesbrady at gmail.com
Sun Feb 12 12:21:48 CST 2012


Bill,
This is greatly helpful.
Thanks again.

Mark B. Magee
Sent from IPhone 4

On Feb 12, 2012, at 9:32 AM, Laura Walker <blwalker105 at sbcglobal.net> wrote:

> Mark,  
> 
> 9 on top leading edge of cowl
> 9 on bottom leading edge
> 4 on each top side
> 8 on each bottom side
> 2 beside spinner
> 4 on battery hatch
> 4 on dog house
> 
> None of my posts are attached to the cowlings, hatch or dog house.  I suppose I could attach all but the cowl leading edges and maybe the first 2 forward ones top and bottom but i just chose not to. They have a nice spring-loaded engagement and once locked only a post pin failure could cause one to come out. It wouldn't matter if your post housing was attached to the cowling or not.
> 
> The dog house cannot have the posts fixed in it because it slides into position.
> 
> I chose not to fix the posts in the battery hatch because the retaining washers would have raised the hatch up slightly, no longer smooth to the fuselage.
> 
> Hope this helps.
> 
> Bill
> 
> 
> <photo.JPG>
> 
> 
> 
> Sent from my iPad
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


More information about the Reflector mailing list