REFLECTOR: Fitment of Rear Aileron Control Bracket

[Paul Folkes]

Hello all,

I am in the process of installing the aileron control fittings in the
keel.  The manual indicates that (mostly) the aileron torque tube runs down
the keel approx 1 inch in from the pilot side of the keel.  The manual is
not clear (or I am not reading it right!) on the exact position of the
aileron control bracket at the aft end of the keel - it says "mount this
assembly against the aft side of the keel fin with the centre of the
bearing 1" below the top of the inside of the keel" - it doesn't say
anything about lateral placement.  I think it should also be about 1" in
from the pilot side of the keel to keep the torque tube in alignment.
Before I put the bracket in the wrong position, can someone please confirm
that the centre of the bearing should be 1" from the top and 1" in from the
pilot side of the keel?

Many thanks,

Paul Folkes
XLRG
VH-VVX
*building, but a loooong way to go!*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20121214/bdffdae6/attachment.html>