REFLECTOR: Hydraulic reservoir

[Donald Bates]

The hydraulic reservoir has to breath to relive the small variation in volume in the system when the pump run its cycle. If the cap is screwed on very tight it may not be able to breath and will crack the reservoir. I put a 1/16 inch diameter hole in my cap and screw it on with a piece of old t-shirt fabric underneath the cap to keep out dirt. Works great...

Don Bates 
N14B SERG 200HP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20121209/cc72dfd6/attachment.html>