REFLECTOR: Shimmy Damper Dystem
Scott Derrick
scott at tnstaafl.net
Fri Aug 17 21:03:54 CDT 2012
Isn't somebody manufacturing a hydrolic shimmy damper system for the
Velocity?
Don't be shy, speak up! Its ok.
Scott
-------- Original Message --------
Subject: Re: REFLECTOR: Reflector Digest, Vol 89, Issue 59
From: sbjknox <sbjknox at earthlink.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Date: 08/16/2012 07:06 PM
>
> ----- Original Message ----- From: "Mark Riley" <the_rileys1 at verizon.net>
>
>
>> Buy a shimmy damper from Velocity
>> Problem solved.
>>
>
> Or build one. Problem solved.
> I built this one in Spring 2006 and have not needed to service it
> since. No more shimmy and easy turning with the Big Nut slacked off to
> zero drag. This one cost me less than $2.
> Go back and dig thru the 2006 archives for complete details (text and
> photos).
>
> Sid Knox
> Oklahoma
>
> Velocity 173 RG N199RS
> Starduster N666SK
> KR2 N24TC
> W7QJQ
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
--
Even if you're on the right track, you'll get run over if you just sit
there.
Will Rogers
More information about the Reflector
mailing list