REFLECTOR: IO-360 / Remove Slick Mag Suggestion

[Tom Cacek]

Be sure to pull the wire cap and assembly first (90' flat screw driver), that should just make it.


-----Original Message-----
From: Kevin Baker <flykb at verizon.net>
To: 'Velocity Aircraft Owners and Builders list' <reflector at tvbf.org>
Sent: Sun, Aug 12, 2012 1:30 pm
Subject: REFLECTOR: IO-360 / Remove Slick Mag Suggestion


Hi All,
Ok....  I'm to the point I need to remove the Slick 4373 Mag from the 
back of the engine on a Velocity Elite 173
I have 1 elec and 1 mag (mag on the right side if viewing plane from the 
rear).
So my question is ... does anyone have any words of wisdom in getting 
this thing off. (Very tight between the mag and firewall etc, etc, etc.)

Thanks,
Kevin Baker
N164PS
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120812/3718a5d7/attachment.html>