REFLECTOR: RAM Mount
Geoff Gerhardt
geoff.gerhardt at gmail.com
Sat Aug 11 14:03:44 CDT 2012
That looks like a good solution. Does it interfere with your stick? It
looks like you might have to give the stick a bit of a reach-around with
the mount there ;) I was thinking of mounting something on the right side
of the glare shield to hold it.
On Sat, Aug 11, 2012 at 12:46 PM, John Dibble <aminetech at bluefrog.com>wrote:
> Geoff,
>
> Here's a picture of the mount ball. I made a 1/8" aluminum plate with
> tapped holes that goes inside the keel. This adds strength and makes
> installation very easy. I put some structural adhesive on the plate so it
> will stay in place if I need to remove the mount. The arm rest pad is
> fastened with strips of velcro on each side. The white power cable runs in
> between the velcro, coming from a cigarette outlet in the keel between the
> front seats.
>
> John
>
>
> On 8/10/2012 7:07 PM, John Dibble wrote:
>
> It's mounted on the top of the keel, left side just aft of the stick with
> 2 small screws, I think. I'll get a picture.
>
> John
>
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120811/d41d86c2/attachment.html>
More information about the Reflector
mailing list