REFLECTOR: Voltage across Mag Switch

Kevin Baker flykb at verizon.net
Thu Aug 9 16:13:47 CDT 2012


Thanks all
Really appreciate all the great info and suggestions.

Thanks once again,
Kevin

.

On Aug 9, 2012, at 3:29 PM, Jones Nick <nick.jones at volvo.com> wrote:

> On all the mags I’ve ever worked on, the mag switch grounds the magneto. There wouldn’t be any voltage through the switch unless the engine was running and then it is pulsed.
>  
> Best regards,
>  
> Nick and Connie Jones
> Velocity XL-RG
> N10CN
> 99% done 90% to go
>  
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of flykb at verizon.net
> Sent: Thursday, August 09, 2012 4:14 PM
> To: reflector at tvbf.org
> Subject: REFLECTOR: Voltage across Mag Switch
>  
> Hi All,
> On my setup...
> I have a swtich for MAG and one for Elect. and a starter button.
> On the MAG switch is there suppose to be a voltage measured across the MAG switch wires?  (On/Off)
>  
> Thanks,
> Kevin Baker
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120809/e1760b1c/attachment-0001.html>


More information about the Reflector mailing list