REFLECTOR: Elevator trim motor location
Reiff Lorenz
Reiff at Lorenz.com
Thu Apr 26 15:42:02 CDT 2012
Thanks for the advice, Brian. Probably a good idea to wait since I have no clue what avionics I'll end up with.
Where did you end up installing your pitch trim?
Reiff
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Brian Michalk
Sent: Wednesday, April 25, 2012 7:19 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Elevator trim motor location
The two limiting factors are clearance with the top of the fuselage, making the center the ideal location. The other end is clearance with the avionics, making the left preferable.
I suggest not installing it until you are finished with the instrument panel.
On 04/25/2012 06:12 PM, Reiff Lorenz wrote:
The manual is telling me to find a suitable location on the canard to mount the elevator trim motor. "Slightly left of center is best." (I interpret this to mean "on the left side as close to the center as possible without getting in the way of the counterweight arm.")
Will you all please tell me where your pitch trim actuators are located and if you're happy with it there?
Thanks!
Reiff Lorenz, Dayton OH
XL RG, 31% complete
Trying to finish the canard tasks
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery<http://www.tvbf.org/gallery>
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail<http://www.tvbf.org/pipermail>
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120426/1fc94d3a/attachment.htm>
More information about the Reflector
mailing list