REFLECTOR: Elevator trim motor location

[Brian Michalk]

The two limiting factors are clearance with the top of the fuselage, 
making the center the ideal location.  The other end is clearance with 
the avionics, making the left preferable.

I suggest not installing it until you are finished with the instrument 
panel.

On 04/25/2012 06:12 PM, Reiff Lorenz wrote:
>
> The manual is telling me to find a suitable location on the canard to 
> mount the elevator trim motor. "Slightly left of center is best." (I 
> interpret this to mean "on the left side as close to the center as 
> possible without getting in the way of the counterweight arm.")
>
> Will you all please tell me where your pitch trim actuators are 
> located and if you're happy with it there?
>
> Thanks!
>
> Reiff Lorenz, Dayton OH
>
> XL RG, 31% complete
>
> Trying to finish the canard tasks
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120425/cdf2769a/attachment.htm>