REFLECTOR: Cylinder insertion

Dugas Bellsouth renedugas at gmail.com
Fri Apr 6 09:14:09 CDT 2012


Get this 1/4" water shut off valve handle at the hardware store. Clamp Vise Grip to it. After attaching upper end of strut slide this under the lower end. I place a two inch strip of 1/8" aluminum under it to distribute the pressure. The hole in the handle scoops up the end then rotate to lift. I push it on with a long screw driver. Less than a minute. 
I've tried MANY others techniques but came up with this one. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: photo 1.JPG
Type: image/jpeg
Size: 33641 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120406/1c534ba0/attachment-0002.jpeg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: photo 2.JPG
Type: image/jpeg
Size: 48194 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120406/1c534ba0/attachment-0003.jpeg>
-------------- next part --------------



Rene' Dugas
Sent from my iPhone4S


More information about the Reflector mailing list