REFLECTOR: Dynon autopilot

Alex Balic velocity_pilot at verizon.net
Tue Apr 3 18:42:42 CDT 2012


Yes, I have the mother of all hatches! 

I can get everywhere in the nose with no difficulty and get to the back of
the instruments as well, I have not finalized the mounting, but probably
hinges up front with either remote unlock like others have done, or screws
on the aft side,,,,

 

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Brian Michalk
Sent: Tuesday, April 03, 2012 3:16 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Dynon autopilot

 

Is that the really, really big hatch?

On 4/3/2012 1:19 PM, Alex Balic wrote: 

I have this pretty bad picture taken during installation , I need to go out
and take some new pics- will send them along. Basically, just built up a
small mounting pad on top, made an aluminum bracket to mount it, and got a
second attach bracket from Velocity and set it up pretty much like the trim.
 
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Ron N Velocity XLFG
Sent: Tuesday, April 03, 2012 12:31 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Dynon autopilot
 
Got pictures of you auto pilot elevator trim setup?
----- Original Message ----- 
From: "Alex Balic"  <mailto:velocity_pilot at verizon.net>
<velocity_pilot at verizon.net>
To: "'Velocity Aircraft Owners and Builders list'"
<mailto:reflector at tvbf.org> <reflector at tvbf.org>
Sent: Tuesday, April 03, 2012 10:55 AM
Subject: Re: REFLECTOR: Dynon autopilot
 
 

I placed my pitch servo on the canard top- actuates the elevator in the 
same
manner as the pitch trim does, but works on the other elevator with a 
second
attach point. The roll servo is mounted on the floor between the gear
bulkhead and the rear fins of the keel, actuates the arm that the flex
cables are attached to.
 
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of David Ullman
Sent: Tuesday, April 03, 2012 7:35 AM
To: reflector at tvbf.org
Subject: REFLECTOR: Dynon autopilot
 
Anyone flying with a Dynon autopilot?  I have a Skyview and just saved up
enough ($1500) for the servos but want to see how others have installed 
them
(especially on roll) before I send money and spend time.
 
David Ullman
N-444DX Velocity
EAA 292 President
david at davidullman.com
541-754-3609
1655 NW Hillcrest Dr
Corvallis OR 97330
*********
 
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
 
Visit the gallery!  www.tvbf.org/gallery user:pw = tvbf:jamaicangoose 
Check
new archives: www.tvbf.org/pipermail Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html
 
_______________________________________________
To change your email address, visit 
http://www.tvbf.org/mailman/listinfo/reflector
 
Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
 

 
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
 
Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html






_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
 
Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120403/f2a95be6/attachment.htm>


More information about the Reflector mailing list