REFLECTOR: Dynon autopilot

[Geoff Gerhardt]

David,

Here's a link <http://thegerhardts.com/velocity/?p=259> that shows how I
implemented my pitch servo (Dynon).  I mounted my roll servo behind the
whale tail, but I didn't see anything on my site that describes it.  I know
have a bunch of pictures somewhere - I'll either send them to you or post
them on my site.

Geoff

On Tue, Apr 3, 2012 at 2:19 PM, Alex Balic <velocity_pilot at verizon.net>wrote:

> I have this pretty bad picture taken during installation , I need to go out
> and take some new pics- will send them along. Basically, just built up a
> small mounting pad on top, made an aluminum bracket to mount it, and got a
> second attach bracket from Velocity and set it up pretty much like the
> trim.
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> Behalf Of Ron N Velocity XLFG
> Sent: Tuesday, April 03, 2012 12:31 PM
> To: Velocity Aircraft Owners and Builders list
> Subject: Re: REFLECTOR: Dynon autopilot
>
> Got pictures of you auto pilot elevator trim setup?
> ----- Original Message -----
> From: "Alex Balic" <velocity_pilot at verizon.net>
> To: "'Velocity Aircraft Owners and Builders list'" <reflector at tvbf.org>
> Sent: Tuesday, April 03, 2012 10:55 AM
> Subject: Re: REFLECTOR: Dynon autopilot
>
>
> >I placed my pitch servo on the canard top- actuates the elevator in the
> >same
> > manner as the pitch trim does, but works on the other elevator with a
> > second
> > attach point. The roll servo is mounted on the floor between the gear
> > bulkhead and the rear fins of the keel, actuates the arm that the flex
> > cables are attached to.
> >
> > -----Original Message-----
> > From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> > Behalf Of David Ullman
> > Sent: Tuesday, April 03, 2012 7:35 AM
> > To: reflector at tvbf.org
> > Subject: REFLECTOR: Dynon autopilot
> >
> > Anyone flying with a Dynon autopilot?  I have a Skyview and just saved up
> > enough ($1500) for the servos but want to see how others have installed
> > them
> > (especially on roll) before I send money and spend time.
> >
> > David Ullman
> > N-444DX Velocity
> > EAA 292 President
> > david at davidullman.com
> > 541-754-3609
> > 1655 NW Hillcrest Dr
> > Corvallis OR 97330
> > *********
> >
> > _______________________________________________
> > To change your email address, visit
> > http://www.tvbf.org/mailman/listinfo/reflector
> >
> > Visit the gallery!  www.tvbf.org/gallery user:pw = tvbf:jamaicangoose
> > Check
> > new archives: www.tvbf.org/pipermail Check old archives:
> > http://www.tvbf.org/archives/velocity/maillist.html
> >
> > _______________________________________________
> > To change your email address, visit
> > http://www.tvbf.org/mailman/listinfo/reflector
> >
> > Visit the gallery!  www.tvbf.org/gallery
> > user:pw = tvbf:jamaicangoose
> > Check new archives: www.tvbf.org/pipermail
> > Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> >
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120403/e821f516/attachment-0001.htm>