REFLECTOR: Dynon autopilot

[Brian Michalk]

Is that the really, really big hatch?

On 4/3/2012 1:19 PM, Alex Balic wrote:
> I have this pretty bad picture taken during installation , I need to go out
> and take some new pics- will send them along. Basically, just built up a
> small mounting pad on top, made an aluminum bracket to mount it, and got a
> second attach bracket from Velocity and set it up pretty much like the trim.
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> Behalf Of Ron N Velocity XLFG
> Sent: Tuesday, April 03, 2012 12:31 PM
> To: Velocity Aircraft Owners and Builders list
> Subject: Re: REFLECTOR: Dynon autopilot
>
> Got pictures of you auto pilot elevator trim setup?
> ----- Original Message -----
> From: "Alex Balic"<velocity_pilot at verizon.net>
> To: "'Velocity Aircraft Owners and Builders list'"<reflector at tvbf.org>
> Sent: Tuesday, April 03, 2012 10:55 AM
> Subject: Re: REFLECTOR: Dynon autopilot
>
>
>> I placed my pitch servo on the canard top- actuates the elevator in the
>> same
>> manner as the pitch trim does, but works on the other elevator with a
>> second
>> attach point. The roll servo is mounted on the floor between the gear
>> bulkhead and the rear fins of the keel, actuates the arm that the flex
>> cables are attached to.
>>
>> -----Original Message-----
>> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
>> Behalf Of David Ullman
>> Sent: Tuesday, April 03, 2012 7:35 AM
>> To: reflector at tvbf.org
>> Subject: REFLECTOR: Dynon autopilot
>>
>> Anyone flying with a Dynon autopilot?  I have a Skyview and just saved up
>> enough ($1500) for the servos but want to see how others have installed
>> them
>> (especially on roll) before I send money and spend time.
>>
>> David Ullman
>> N-444DX Velocity
>> EAA 292 President
>> david at davidullman.com
>> 541-754-3609
>> 1655 NW Hillcrest Dr
>> Corvallis OR 97330
>> *********
>>
>> _______________________________________________
>> To change your email address, visit
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery!  www.tvbf.org/gallery user:pw = tvbf:jamaicangoose
>> Check
>> new archives: www.tvbf.org/pipermail Check old archives:
>> http://www.tvbf.org/archives/velocity/maillist.html
>>
>> _______________________________________________
>> To change your email address, visit
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120403/9b6be036/attachment.htm>