REFLECTOR: Dynon autopilot

[Ron N Velocity XLFG]

Got pictures of you auto pilot elevator trim setup?
----- Original Message ----- 
From: "Alex Balic" <velocity_pilot at verizon.net>
To: "'Velocity Aircraft Owners and Builders list'" <reflector at tvbf.org>
Sent: Tuesday, April 03, 2012 10:55 AM
Subject: Re: REFLECTOR: Dynon autopilot


>I placed my pitch servo on the canard top- actuates the elevator in the 
>same
> manner as the pitch trim does, but works on the other elevator with a 
> second
> attach point. The roll servo is mounted on the floor between the gear
> bulkhead and the rear fins of the keel, actuates the arm that the flex
> cables are attached to.
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> Behalf Of David Ullman
> Sent: Tuesday, April 03, 2012 7:35 AM
> To: reflector at tvbf.org
> Subject: REFLECTOR: Dynon autopilot
>
> Anyone flying with a Dynon autopilot?  I have a Skyview and just saved up
> enough ($1500) for the servos but want to see how others have installed 
> them
> (especially on roll) before I send money and spend time.
>
> David Ullman
> N-444DX Velocity
> EAA 292 President
> david at davidullman.com
> 541-754-3609
> 1655 NW Hillcrest Dr
> Corvallis OR 97330
> *********
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery user:pw = tvbf:jamaicangoose 
> Check
> new archives: www.tvbf.org/pipermail Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>