REFLECTOR: Dynon autopilot

[Alex Balic]

I placed my pitch servo on the canard top- actuates the elevator in the same
manner as the pitch trim does, but works on the other elevator with a second
attach point. The roll servo is mounted on the floor between the gear
bulkhead and the rear fins of the keel, actuates the arm that the flex
cables are attached to.

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of David Ullman
Sent: Tuesday, April 03, 2012 7:35 AM
To: reflector at tvbf.org
Subject: REFLECTOR: Dynon autopilot

Anyone flying with a Dynon autopilot?  I have a Skyview and just saved up
enough ($1500) for the servos but want to see how others have installed them
(especially on roll) before I send money and spend time.

David Ullman
N-444DX Velocity
EAA 292 President
david at davidullman.com
541-754-3609
1655 NW Hillcrest Dr
Corvallis OR 97330
*********

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery user:pw = tvbf:jamaicangoose Check
new archives: www.tvbf.org/pipermail Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html