REFLECTOR: Damper

[Robert Wood]

John, I assume I can deliver it. If so, can I leave the wheel in the fork? Can I wait while it is  installed, or is that a several day process?


Bob Wood
Sent from my iPad

On Sep 27, 2011, at 8:49 AM, "John Abraham" <John at velocityaircraft.com> wrote:

> Ok everyone.  I think finally the time has come where in one week we will be able to start selling the new damper system that we have been talking about for so long. (sorry dragging my feet on this with other things going on).  Those who want the system will have to send in their fork to be drilled and tapped for the bracket.  The cost of the bracket, damper system, and drilling and tapping will be $600.00 plus shipping.  Once you receive your fork back you will have to install one stop on the welded washer on the aft side that will limit the forks travel so that you don’t break the shear pin in the damper.  Also an insert that must be pinned in the end of the strut.  Instructions will be included.
> 
>  
> 
> Let me know if you have any questions.  I know I had many people interested, however my computer died a couple weeks ago and so went most of my emails.
> 
>  
> 
> John
> 
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110927/4fc01a05/attachment.htm>