REFLECTOR: cylinder drain valve

[Don Johnston]

I dunno. From the manual:

The intake manifold on the Continental has 3 separate 1/4” lines on each
side of the
engine coming from each cylinder heads to a manifold. From here we need to
make
two hard lines that join together at the back of the engine at an AN824-4D
Tee fitting.
After a short run from the AN824 you will switch to Mil-H-6000 line. Before
the
drain exits the cowling you have to connect to a short run of 1/4” aluminum
line that is
flared at one end with an AN818-6D and an AN819-6D. Screw in an AN815-4-4D
fitting into your 1H19-6 Cylinder drain valve. This is provided by
Continental. Attach
you line to this and route the drain valve out the bottom of the airplane.

------------

Don


Date: Thu, 13 Oct 2011 17:28:06 -0600
From: Scott Derrick <scott at tnstaafl.net>
Subject: Re: REFLECTOR: cylinder drain valve

whats a cylinder drain valve?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20111014/0b93a61b/attachment.htm>