REFLECTOR: Jeffco in sump
Jim Agnew
jim_agnew_2 at yahoo.com
Tue Nov 22 17:47:28 CST 2011
Hi Dan,
I used it very early (2003 maybe. I did not brush it on since it hardened in about 15 minutes for a 16 oz mix. I mixed and dumped in all 16 oz and spread with a plastic squeegee. it worked very well and you could spread it across the bottom and right up a baffle leaving a smooth transition and a heavy coat. Proper prep required fine sanding and cleaning with alcohol on cloth then after drying careful vacuuming to remove any dust. I have no problems and bore scope inspection shows no sign of failure.
Jim
James F. Agnew
Jim_Agnew_2 at Yahoo.Com
Tampa, FL
Velocity 173 Elite Aircraft Completed & Flying
From: Dan Schindler <danpilot91 at gmail.com>
>To: "reflector at tvbf.org" <reflector at tvbf.org>
>Sent: Tuesday, November 22, 2011 5:35 PM
>Subject: REFLECTOR: Jeffco in sump
>
>I was just wondering how many use Jeffco in the sump tank?
>
>Sent from my iPad
>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery! www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20111122/13e3e79b/attachment-0001.htm>
More information about the Reflector
mailing list