No subject
Mon May 30 12:23:25 CDT 2011
has a small (1/16") hole in the back at the top. The website says they
are compatible with auto gas, but I have no plans to use that.
John
Brett Ferrell wrote:
> As I metioned in my orginal post, "The 12" light strips nestle into
> the curve of the Atkinson gauges".... I never liked the look of the
> elbow style gauge, and I worried about someone in the back damaging
> them, as Jim rightly pointed out, "accidentally pulls the tubing off
> the fittings and you have to get to them in a hurry only to find them
> buried"... with Vance's guages I don't have that concern. Here's a
> picture of them getting glassed onto the bulkhead, with purple tape to
> mask the bubble and keep it clean.[Image]
> Vance's gauges - http://pages.sbcglobal.net/ccanedy/vafuelsites.htm! l
> [Image] Brett
>
-------Original Message-------
From: John Dibble
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Fuel Sight Gauges
Sent: 08 Jun '11 19:08
Tom,
I don't know, but you're reading my mind. Brett's look similar to
mine and I was
going to ask if anyone had a more detail pic of the Atkinson.
Mine appear to be
rounded at the top and bottom. What material are the Atkinson
gauges made of?
John
Tom Falls wrote:
> John,
>
> This looks to me like the Atkinson gauge. Do you know if it is
or not? The
> factory set up would have a brass elbow on top and bottom with
clear tubing
> between.
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org
[mailto:reflector-bounces at tvbf.org] On
> Behalf Of John Dibble
> Sent: Tuesday, June 07, 2011 3:31 PM
> To: Velocity Aircraft Owners and Builders list
> Subject: Re: REFLECTOR: Fuel Sight Gauges
>
> Here's a pic of mine. As I said before, it's 12 years old and
still clear
> as a bell. It's embedded into the strake baggage area and it
looks like the
> builder never intended to be replacing it. It feels like a hard
plastic.
> The strip along the left side is an led strip for night viewing.
>
> Tom Falls wrote:
>
> > I guess I missed that. I do plan on using auto fuel, so it's
the
> > factory design for me. For those with the factory style sight
gauges,
> > could please send pictures of how you did the interior around
them to
> > make them more pleasing to the eye? Thanks much,Tom
>
> _______________________________________________
> To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
> ----------------------------------------------------------------
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
--------------9BBAFF07475062334F50A3F5
Content-Type: multipart/related;
boundary="------------9EC20FE99154C733BCB6FC48"
--------------9EC20FE99154C733BCB6FC48
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
More information about the Reflector
mailing list