REFLECTOR: Franklin Will not turnover when hot

Michael Watson mikewatsspg at gmail.com
Sun May 22 17:13:05 CDT 2011


Larry,

Mine came with the same starter and adapter plate. I replaced the original
starter with a skytex and then a ford (NAPA 2446115),
but still the same problem. I have never had a problem with adapter plate,
but you are right, it is poorly made and is
prone to leak oil back into the starter solenoid. Would your brother
consider making one for me? PM me if he can.



On Sun, May 22, 2011 at 3:13 PM, Laurence Coen <lwcoen at hotmail.com> wrote:

>  Mike,
>
> My Franklin came with a Honda Civic starter with a very poorly made,
> welded-up adapter plate.  Luckily my brother was a tool and die maker and
> produced an adapter of my design from an aluminum billet.  The battery is a
> 55 AHR Optima deep discharge with #2 wire.  Never a starting problem.
>
> Larry Coen
> N136LC
>
>  *From:* Michael Watson <mikewatsspg at gmail.com>
> *Sent:* Wednesday, May 18, 2011 3:38 PM
> *To:* Reflector <reflector at tvbf.org>
> *Subject:* REFLECTOR: Franklin Will not turnover when hot
>
> To all Franklin powered Velocity owners.
>
> From new, I have always had a problem starting the engine within ten to
> thirty minutes after landing.
> The engine will turn to it's first compression stroke then stop. After
> three or four try's I'll just have to
> wait thirty minutes, then the engine will turnover and start within one or
> two power stroke/s.
> This is annoying if you just want to make a quick fuel stop.
>
> I have replaced the Concord 35x with an Odyssey PC1200MJT 40AH battery 1200
> Amp. starting current
> with the same result.  I have placed another Odyssey 960 battery behind the
> rear left seat, and wired it
> so it parallels the front battery when the starter is engaged, still same
> problem. A year or so ago, some
> one on the reflector suggested replacing the starter with a ford part
> number. I did that, still same problem.
>
> The plane was originally wired with #2 wire, all connectors were power
> crimped, the connectors to and
> from the contractors are cleaned, treated and re tightened at each annual.
> I realize that the Franklin has
> 10.5:1 compression and when hot, can actually be slightly more, but my BMW
> M5 engine is also 10.5:1
> compression and the same battery spins the engine very fast hot or cold.
> Could the problem be that the
> starter is being heat soaked, which reduces it's efficiency?  Is anyone
> else experiencing this problem?
>
> BTW:  I tried a Skytek starter which broke on the first start. it went into
> the garbage.
> --
> Mike W.
> 1997 Velocity Elite RG
> Franklin /IVO Electric CS
> Dual GRT EFIS HX Synthetic Vision
>
> ------------------------------
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>



-- 
Mike W.
1997 Velocity Elite RG
Franklin /IVO Electric CS
Dual GRT EFIS HX Synthetic Vision
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110522/8c657bff/attachment.htm>


More information about the Reflector mailing list