REFLECTOR: AN fittings and the RG pump
Erik Franks
efranks at frugalmedia.com
Tue May 10 13:02:43 CDT 2011
When I disassembled mine the way mine was set up did not use the 4 screw
holes on top to attach the reservoir to the pumpbody. It used a bolt
underneath the reservoir to hold it all together. I think if you just
loosened that you could probably rotate the reservoir to any angle like
Andy's.
-Erik Franks
On Tue, May 10, 2011 at 10:50 AM, Andrew Ellzey <ajlz72756 at yahoo.com> wrote:
> Peter,
>
> I didn't have to rotate my pump, it came from Velocity in the configuration
> as shown in my photo.
>
> Andy
>
> *From:* Peter Braswell <peter.braswell at gmail.com>
> *To:* Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> *Sent:* Tuesday, May 10, 2011 12:34 PM
> *Subject:* Re: REFLECTOR: AN fittings and the RG pump
>
> Hi Andy,
> Our pumps look VERY similar but I can't get mine to turn 90 degrees like
> you have yours mounted, the screw holes won't line up for that orientation.
> If it would, I'd be out of the woods!
>
> Peter
> --------------------------------------------------------------
> Check out:
> *"It's a Jungle Up There": www.zuluworks.com*
> *Selling your Airplane?* : www.fly-mart.com
> *Great Aviation Gear: www.sky-gadgets.com*
> My blog: www.icekreamkoan.com
> --------------------------------------------------------------
>
>
>
> On Tue, May 10, 2011 at 12:37 PM, Andrew Ellzey <ajlz72756 at yahoo.com>wrote:
>
> Peter,
>
> Your pump appears to be different to mine, see photo.
>
> Andy
> ---------------------------------
>
> ----- Original Message -----
> *From:* Peter Braswell <peter.braswell at gmail.com>
> *To:* Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> *Sent:* Tuesday, May 10, 2011 10:16 AM
> *Subject:* REFLECTOR: AN fittings and the RG pump
>
> Hi all,
> Working on my RG pump over the weekend, I discovered a weird problem that I
> was wondering if other folks had. The pump has a swivel fitting attached to
> it followed by a T fitting with a nipple and female NPT threads on the run
> and another nipple on the leg. The T fitting gets set up so that the runs
> are oriented vertically so that the pressure switch goes on top and the
> aluminum tubing comes in from the bottom.
>
> The problem is with the hydraulic fluid reservoir. It projects out too far
> and prevents the vertical orientation of the fitting. See picture.
>
> It was suggested to rotate the reservoir which only moves the problem to
> the back side preventing mounting to the canard bulkhead. The hole patterns
> prevent 90 degree rotation.
>
> I think I could kludge something up with some AN hardware (a few couplers)
> - but it feels a bit like a hack. Just wondering if anybody else has
> encountered this and if so, what's the solution?
>
> Best,
> Peter
>
> --------------------------------------------------------------
> Check out:
> *"It's a Jungle Up There": www.zuluworks.com*
> *Selling your Airplane?* : www.fly-mart.com
> *Great Aviation Gear: www.sky-gadgets.com*
> My blog: www.icekreamkoan.com
> --------------------------------------------------------------
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110510/eccc9c6b/attachment.htm>
More information about the Reflector
mailing list