REFLECTOR: Compressions
Scott Derrick
scott at tnstaafl.net
Tue May 3 08:44:48 CDT 2011
I'd expect them all to be at or above 70/80
Be sure to check when warm,.
If you have a low one( < 65), run the engine 15 minutes and try again.
If still low, squirt some oil in the cylinder(try to get between piston
and ring), crank through a few times and try again
If still low, run for 5 hours and try again.
If still low, with somebody trustworthy holding prop at TDC with air
pressure on, listen in exhaust stack for that cylinder, listen in intake
and listen in oil filler. If you can hear a distinctive whistle or air
leakage sound in one of those, you know where the leakage is, exhaust
valve, intake valve, rings respectively.
Scott
Kevin Baker wrote:
> Hi All,
> What kind of compressions would one expect from a
> IO360 C1 200 hp 2001 Overhaul with 150 hours?
>
> Thanks,
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
--
No pessimist ever discovered the secret of the stars or sailed an uncharted land, or opened a new doorway for the human spirit.
Helen Keller
More information about the Reflector
mailing list