REFLECTOR: Goose Repair Update (Engine Run)

Brian Michalk michalk at awpi.com
Mon Mar 21 12:48:43 CDT 2011


With the three blades, I can only get 2250RPM.  I never recorded what I 
got with WOT, coarse.

With the two blades, I get 2700RPM fine and 1700RPM coarse.


On 3/21/2011 12:23 PM, aminetech at bluefrog.com wrote:
>
> --- michalk at awpi.com wrote:
>
>
>
>
> I am using a two bladed prop for testing in order to get my static RPM's
> up so that I can map out my fuel table.
>
> Brian, you've mentioned the low static before and I don't understand.  The travel in the IVO prop can be adjusted to get any static you want.
>
> John
>
>
>
> The backup injection was tested, and works well.
>
> The problems I need to work on is a hard cold engine start.  Something's
> not right there, and I only get a few tries per day to work on it.  It
> also runs very poorly on the magneto, so I need to see what's up there
> as well.
>
> Is it a Slick mag?  Will it start on just the mag alone?  I was using standard aircraft massive electrode plugs and they seemed to fail a lot.  I've switched to fine wire plugs and they just keep on working.  I'm planning to switch to a Bendix mag which has a stronger spark.
>
> John
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



More information about the Reflector mailing list