REFLECTOR: tube flare question
Glenn Babcock
glennbabcock at roadrunner.com
Mon Mar 14 13:29:12 CDT 2011
Matt,
Looking again at the picture I would also suggest you check the depth of the tube when you set it in the block (how much sticks out). This flare looks a little shallow. Again, hard to say for sure from one picture.
Regards,
Glenn
On Mar 14, 2011, at 1:36 PM, Matt Bucko <mbuc310 at cox.net> wrote:
> Attached are 2 pics.
> #1 shows the marks left on the oil tube from the flare tool. #2 shows the tool. I tried wrapping 1 layer of tape around the tube before I flared it, however, I still get marks on the tub from the tool.
> Are the marks normal, or am I using the wrong tool?
> Matt
>
> <tube_small_scratches.jpg>
>
> <flaretool.jpg>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list