REFLECTOR: Prop Bolt Nuts

[Michael Watson]

Brian,

Please replace the bolts and nuts with the originally IVO supplied ones.
Over the last twelve and a half years I have had no problems with them
loosening up or degrading.


On Wed, Mar 9, 2011 at 11:46 PM, Brian Michalk <michalk at awpi.com> wrote:

> I have some corrosion on the prop nuts, and want to replace them.  Looking
> at the 12-20 nuts at Spruce, I can pay up to $5 or more for a nut.
> I was considering the all metal stop nuts rather than the nylon ones.
>
> What is the thought on this?  I'm using an IVO prop.
>
> Also, should I replace the nuts on the prop flange too?  On the IVO, there
> are actually 12 bolts.  Well, actually six cap screws and six bolts.
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>



-- 
Mike W.
1997 Velocity Elite RG
Franklin /IVO Electric CS
Dual GRT EFIS HX Synthetic Vision
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110310/7b518867/attachment.htm>