REFLECTOR: brakes cylinder

[Erik Franks]

I replaced both of mine with new Napa cylinders. I also tried the repair kit
from Napa and it was not right. I'm upgrading to toe brakes if you're
interested in my new but installed brakes.
-Erik Franks      512-553-5040


On Tue, Mar 8, 2011 at 2:19 PM, Barry Gibbons <gibbons at as.net> wrote:

>  I tried to put a cylinder Kit (Napa 1287) into my master brake cylinder.
> And it will not work. Not the same thing. Has any body replace their master
> cylinder or put a kit in the master cylinder. Do you have any numbers for
> it? My cylinder has two rubber plunger and about 5.25 inches long and the
> kit 1287 has one rubber plunger and is about 3.75 inches long. I’m having a
> problem with sponge brakes .I bleed then and they are good and the next day
> they are sponge again. I’m thinking it is the master cylinder. I cap the
> line from the cylinder and push on the brakes and they are hard, I then cap
> the line buy the caliper and push on brakes and the brakes are hard. I turn
> my caliper up side down and bleed the brakes no air. What do you think?
>
> Barry
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110308/c9985e6e/attachment.htm>