REFLECTOR: Sump Light Blinking

[slvegl99 at aol.com]

My vent is from the top of the sump. I still havea blinking warning light. I have a new sendingunit that I intend to install.

Bob Wood Velocity XL FG





-----Original Message-----
From: Velocity <VelocityXL at fastmail.fm>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Wed, Jun 29, 2011 2:44 pm
Subject: REFLECTOR: Sump Light Blinking


Well now I have a common problem I have a blinking sump light. I am using the Gem Optical sensor 
for the sump. I have heard several times that people have used a delay relay to stop the blinking. 
Has any on put a Vent in the top of the sump tank to purge  out all of the air. I built my sump per the 
manual. and the vent tube come through  the side of the sump allowing for air to get trapped in the 
top of the sump. I though I would move the vent to the top of the sump tank with a hard point glued in 
to remove more of the air from the tank. Has  any one done this and had a success 
of failure here.
 
Ron

_______________________________________________
o change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery!  www.tvbf.org/gallery
ser:pw = tvbf:jamaicangoose
heck new archives: www.tvbf.org/pipermail
heck old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110629/95394575/attachment.htm>