REFLECTOR: main gear alignment

[Jim & Sharon Beck]

Thanks Kurt, I could not remember where I found that before.
 Jim

On Tue, Jun 28, 2011 at 5:41 PM, <nmflyer1 at aol.com> wrote:

> Jim, Mine says "expect to get 1" at the front with a shim of about .010"...
> An average AN washer is .060"
>
>
> Kurt
>
>
>
>   -----Original Message-----
> From: Jim & Sharon Beck <jsbeck618 at gmail.com>
> To: reflector at tvbf.org
> Sent: Tue, Jun 28, 2011 3:37 pm
> Subject: REFLECTOR: main gear alignment
>
>  Does anyone remember amount of shimming required to get an inch of
> movement of the laser beam at the front of the aircraft.  I had found this
> the last time I did an alignment but cannot find it now.
> Thanks.
> Jim Beck
> 173 RG
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110628/d74caeee/attachment-0001.htm>