REFLECTOR: main gear alignment

[nmflyer1 at aol.com]

Jim, Mine says "expect to get 1" at the front with a shim of about .010"... An average AN washer is .060"




Kurt





-----Original Message-----
From: Jim & Sharon Beck <jsbeck618 at gmail.com>
To: reflector at tvbf.org
Sent: Tue, Jun 28, 2011 3:37 pm
Subject: REFLECTOR: main gear alignment


Does anyone remember amount of shimming required to get an inch of movement of the laser beam at the front of the aircraft.  I had found this the last time I did an alignment but cannot find it now.
Thanks.
Jim Beck 
173 RG
 
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110628/e147d719/attachment.htm>