REFLECTOR: Piston
John Dibble
aminetech at bluefrog.com
Mon Jul 11 21:16:32 CDT 2011
The wrist pins are hollow. My idea is to machine a second hollow pin that fits in the wrist pin.
John
Mike Dawson wrote:
> You can't just add a stick on weight if that is what you mean but a good machinist should be able to weld up something. It is however, critical that the engine is balanced.
>
> Michael E Dawson
> ATCI CFII
>
> On Jul 11, 2011, at 6:33 PM, John Dibble <aminetech at bluefrog.com> wrote:
>
> > I'm replacing a piston. The new one is 35 grams lighter than the old
> > one. I need to have the weight the same as the opposing piston. I
> > could machine the opposing one or replace it with a lighter one, but I'd
> > prefer if I didn't have to. Can I add weight inside the wrist pin of
> > the lighter one?
> >
> > John
> >
> > _______________________________________________
> > To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> >
> > Visit the gallery! www.tvbf.org/gallery
> > user:pw = tvbf:jamaicangoose
> > Check new archives: www.tvbf.org/pipermail
> > Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list