REFLECTOR: Wing Rack

[Andrew Ellzey]

I agree, depending on how far you have to go. I used some of my left over pieces 
of blue foam just like Darrell's photo showed. Be sure to tape your rudders 
closed.

Andy Ellzey
N151AJ XLRG




________________________________
From: Darrell & Nora Kufalk <kufalk at wi.rr.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Wed, January 26, 2011 6:30:18 AM
Subject: Re: REFLECTOR: Wing Rack


It all depends on how far you have to go and how fast you plan on driving.  I 
only had to go 3 miles at a max speed of 25 mph.
 
Darrell
 
----- Original Message ----- 
>From: Andy Millin 
>To: reflector at tvbf.org 
>Sent: Tuesday, January 25, 2011 10:29 AM
>Subject: REFLECTOR: Wing Rack
>
>
>I’m getting to the point where I will need to transport the wings.  I have seen 
>a pictures of wing racks.  I would appreciate any pictures and ideas on what 
>works best.  I will need to get something built here soon.
> 
>Thanks,
> 
>Andy
________________________________
_______________________________________________
>To change your email address, visit 
>http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110126/85ce8637/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 48548 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110126/85ce8637/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 100_6370a.jpg
Type: image/jpeg
Size: 101969 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110126/85ce8637/attachment-0001.jpg>