REFLECTOR: Windows

Douglas Holub douglas.holub at gmail.com
Tue Jan 25 19:36:29 CST 2011


I think the windows are always oversized and must be cut to fit. My manual said to cut the hole in the fuselage, hold the raw window up against the opening, trace the outline of the opening on to the window, then cut the window about 3/4" larger than that outline.

Doug Holub
2009 Standard FG
  ----- Original Message ----- 
  From: Matt Bucko 
  To: Velocity Aircraft Owners and Builders list 
  Sent: Tuesday, January 25, 2011 4:32 PM
  Subject: REFLECTOR: Windows


  I just cut out the fuselage to fit the windows.  Did anyone need to trim the windows down to fit the cutouts?
  I cut/sanded to the line on the outer skin. Going to cut back the inner skin tomorrow... 3/4 inch.  Plexi seems to be a bit larger than the 3/4 relief will allow for.
  Matt



------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110125/9ef34de0/attachment.htm>


More information about the Reflector mailing list