REFLECTOR: Velocity Parts Free to a Good Home

[Jeff Howell]

I am sure you could send the lower winglets with the rudder pedals that you are sending to Barry. I am in the hanger right next door to him. That way you are only sending one box.... If you dont want to send them together you could send the lower winglets to my house at 3903 Paloma Ct. Rosamond Ca, 93560. Let me know what I owe for shipping. thanx Jeff


 


From: amillin at sbcglobal.net
To: reflector at tvbf.org
Date: Tue, 25 Jan 2011 14:09:31 -0500
Subject: Re: REFLECTOR: Velocity Parts Free to a Good Home








Hey Barry,
 
You are the first to say you want them.  They are yours.
 
Now I have to scratch up some boxes.  J
 
Andy
 


From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Barry Gibbons
Sent: Tuesday, January 25, 2011 12:31 PM
To: 'Velocity Aircraft Owners and Builders list'
Subject: Re: REFLECTOR: Velocity Parts Free to a Good Home
 
Hello Andy
I would like the rudder pedal if no one has bids on them. Barry Gibbons 4140 Knox Av. Rosamond Ca. 93560.  Let me know how much it cost to ship and I will get a check in the mail.
Barry
 
 
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Andy Millin
Sent: Monday, January 24, 2011 6:48 PM
To: 'Velocity Aircraft Owners and Builders list'
Subject: REFLECTOR: Velocity Parts Free to a Good Home
 

I've been cleaning up the shop and have a few Velocity parts that are not going to get used.

 

The parts are for an XL.  Though, knowing Velocity, I wouldn't doubt they might be useable on a standard as well.

 

I have a set of the original rudder pedals.  Finished through black paint.  I upgraded to the toe brakes. 

 



 

I also have the Velocity belly NACA inlet scoop.  Yep, it came with the kit and was all the rage in 2000 when I recieved my kit.  It is approximately 3 1/2 feet long and a little over a foot wide.  It mounts like the NACA type inlet you might have seen on a Trans-Am hood.  To be honest, I don't think I ever saw one mounted on a Velocity.  Shortly after my kit was delivered, the overhead inlets were developed and intakes went on top.

 

This piece might be useful for someone installing a turbo charger, or possibly an automotive conversion and needs another inlet for intake or cooling.

 

Very Rare!  Be the first on your block to own one!

 

These parts are free to the first requester.  You'll pay the shipping.  :)

 

Andy
_______________________________________________ To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector Visit the gallery! www.tvbf.org/gallery user:pw = tvbf:jamaicangoose Check new archives: www.tvbf.org/pipermail Check old archives: http://www.tvbf.org/archives/velocity/maillist.html 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110125/9c9efb02/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 20082 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110125/9c9efb02/attachment-0001.jpg>