REFLECTOR: Tera Comm

[Michael Watson]

Jon,

Pull the unit out of case, spray some electrical contact cleaner into the
contacts in the back of the case.
Use a pencil eraser and rub it gently over the contacts on the back of the
radio. Insert the radio back
into the case and push then pull the radio in and out of the contact a
couple of times. Re tighten the
allen screw and see if the lights come back on. Been there done that.



On Tue, Jan 18, 2011 at 12:28 PM, Bachman, Jonathan <
jonathan.bachman at mtsi-va.com> wrote:

> I turned on my radios last weekend and discovered that my Tera Comm #1 did
> not light up.  It did transmit, as verified by my #2 Comm.  Is there
> anything I should check before I look into a replacement.  I was hoping to
> not redo the panel yet.  Thanks
>
>
>
> Jon Bachman
>
> N956DR
>
> Std RG
>
>
>
>
>
> jonathan.bachman at mtsi-va.com
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>



-- 
Mike W.
1997 Velocity Elite RG
Franklin /IVO Electric CS
Dual GRT EFIS HX Synthetic Vision
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110118/7f393de0/attachment.htm>