REFLECTOR: Main gear alignment

[Jim & Sharon Beck]

Hi Scott
is that 10 degrees top out ( or away from the body ) .  seems like a lot of
change to go from there to 0 degrees.  would the 10 degrees be when
you set it down from the jacks or after rolling as it comes to a stop empty?
Jim



On Tue, Aug 2, 2011 at 11:39 AM, Jim & Sharon Beck <jsbeck618 at gmail.com>wrote:

> I noticed the camber on my main gear is not the same and would like to get
> it corrected while adjusting the toe in.  I cant seem to find the specs in
> the manual.
> Can anyone tell me where to find  or what the proper angle is and is the
> angle measured while loaded on the floor. or on on jacks,
> Thanks.
> Jim   173 RG Lyc !O360  450 hrs
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110802/122aedfd/attachment.htm>