REFLECTOR: Needed: canard

[Peter Braswell]

Dear Canardians ....

You know that builder's axiom that says "Measure twice, cut once"?  Well
apparently that only works when you don't measure wrong twice.

Maybe it was all years building R/C gliders where the control surfaces are
hinged close together.  Long story short: while I was digging out pockets
for the hinge arms I managed to route into the canard spar AT EACH LOCATION.

Going to go ahead and file that under "dumb".

Anyway, I've been working with the factory.  I may buy a FB or kit from
them, depends on how deep the Cisco Systems layoffs go, though I think I'm
safe.  I was urged by Nick Jones to check with everybody here to see if
there might be a canard floating around.  I have an SERG.

TIA,
Peter


--------------------------------------------------------------
Check out:
*"It's a Jungle Up There": www.zuluworks.com*
*Selling your Airplane?* : www.fly-mart.com
*Great Aviation Gear: www.sky-gadgets.com*
My blog: www.icekreamkoan.com
--------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20110801/6703a4ba/attachment.htm>