REFLECTOR: Sweatshirts Round 3
Richard J. Gentil
richard at naples-air-center.com
Mon Nov 8 14:16:37 CST 2010
Hey Terry,
What you are doing is fantastic!
What I want is several short sleeve T-Shirts in Large. I am not sure
what you are doing for color and material options but I am not really
bothered as long as they fit. If you are doing sweatshirts or hoodies, I
would be interested too but not sure what was up on that. The most
important is the short sleeve T-shirts since I live in South West Florida.
If you need shipping details:
Richard J. Gentil
230 Aviation Drive South
Naples, FL 34104
239-643-171
Thank You,
Richard
On 11/6/2010 5:15 PM, Terrence Miles wrote:
>
> Hi Folks,
> Here is where we are. Above are four attached pics. The Velocity in
> the blue circle is a design Alex Balic did for the Velo Symposium back
> a couple of years ago. We also have a cut of the Swoopie airplane
> alone, without the column of words. If you want to consider either of
> these please advise, otherwise below are the default design choices.
>
> THE CURRENT DESIGN AND OPTIONS
> We have an OK from the factory to use the old sweatshirt design, so
> that is the current plan. That design is for the VELOCITY logo (see
> attch) in the front upper left with the letters being about 1 inch
> high and maybe 4.5 inches across. On the back with be the
> "SwoopieVAB." That is the swoopie looking airplane with the column of
> repeated VELOCITY words reading down vertically across the left
> wing. It is about 14" w by 11" high. You can have this on the front
> or the back. The airplane will be in Red on all shirts unless you
> pick a red shirt. The remaining color of the lettering will be
> dictated by the color of the shirt. (two choices here black or white)
> The design will be painted on and not stitched. If you want either
> design on only one side of the shirt it will save you $2. Say you
> pick out a golf shirt. We can skip the back. Say you want a
> sweatshirt with the Swoopie airplane on the front and nothing on the
> back, that is doable too. That is to say, one sided printing will
> save you about $2.
>
> THE GARMENT OF YOUR CHOICE
> Go to this website: http://www.catalogwearables.com/ There you can
> pick out whatever you want. Don't try to order anything, just write
> down all the particulars and send them to me off line. For tee shirts
> Alex is suggesting we stay with the Gildan 2000 line. For the
> fleecewear (sweatshirts), the recommendation is to choose the 50/50
> blends of cotton and poly as opposed to say 80/20 blends. Sorry, no
> 100 silk or nylon or slippery fabrics. You cannot have the big design
> across the front if you have any zippers or buttons on the front.
>
> THE PRICE
> This website is Alex's supplier. Based on how much we order (I guess)
> is what he has to pay. I have nothing to do with this part. He or I
> will advise each of you. There is no price information until he has a
> look at the total order, but you can go to this website
> https://www.queensboro.com/ and look for something comparable and that
> will be the aprox price less whatever Alex sees at his end from his
> supplier. Add to this about $6 per order for shipping costs to you
> which Alex will be doing. Quick aside, if you see something you can't
> live without at Queensboro or want to go with embroidery, please
> consider holding off an any individual orders, and we can do the same
> group purchase over there too. It is just that Alex only can do
> painting.
>
> THE ORDERING PROCESS
> 1. I know a good number of you have written to me already. Please
> do it again with these details. Go over to
> http://www.catalogwearables.com/ and then I need 6 de-limiters.
> Product code, size, color, how many you want, about what it costs at
> Queensboroand what you expect to be paying (less shipping) and last a
> plain text explanation of what you want on the front and what on the
> back. No we cannot shrink the back design swoopie airplane or blowup
> the classic Velocity name logo with the little airplane in the letter O.
>
> 2. Send that info to me off line. terrence_miles at hotmail.com
> Have that done by Nov 14.
>
> 3. I will then post a spreadsheet of who ordered what, and
>
> 4. Alex can call in and get pricing, which he or I will then post on
> to the spread sheet
>
> 5. When it get it that far, check your name, send in the money,
> and Alex can give us an aprox ready date and get to work.
>
> Last I want to thank Alex for doing this. Brett and Beth for their
> background help in almost matters like this, Malcolm Collier for
> helping me with one of the drawings, and Jorge Bujanda for his
> technical drawings, which are not a part of this go around.
>
> I know this is a bit cumbersome for the first time through, but the
> great advantage is the enormous range of choices. "Build it your
> way," right...?...Where have I heard that before?
>
> Best regards, everyone
> Terry
>
>
>
>
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20101108/9ac59d1f/attachment.htm>
More information about the Reflector
mailing list