REFLECTOR: Oil Line Tubing
Matt Bucko
mbuc310 at cox.net
Thu Dec 16 15:14:44 CST 2010
What is it what comes with the kit?
Matt
On 12/16/2010 1:58 PM, jerry at jlbent.com wrote:
> 5052 is also much stiffer and at 5/8 would be a real challenge to bend
> after it is installed through the duct .
> Jerry Brainard
> Jerry at JLBEnt.com
>
>
> -------Original Message-------
> From: John Tvedte
> To: Velocity Aircraft Owners and Builders list
> Subject: Re: REFLECTOR: Oil Line Tubing
> Sent: Dec 16 '10 3:45pm
>
> I would suggest 5052-0. It's stronger than 3003-0, and ever so
> slightly less weight. In general, due to pressure drop
> considerations, I would suggest a min. of 5/8"x.035 tubing.
>
> Feel free to contact me offline.
>
> John
>
> *From:* reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]
> *On Behalf Of *aminetech at bluefrog.com
> *Sent:* Thursday, December 16, 2010 2:38 PM
> *To:* Velocity Aircraft Owners and Builders list
> *Subject:* REFLECTOR: Oil Line Tubing
>
> What grade aluminum tubing should I use for oil lines?
>
> Thanks,
>
> John
>
> ------------------------------------------------------------------------
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20101216/bf4b597f/attachment-0001.htm>
More information about the Reflector
mailing list