REFLECTOR: Leftovers
Bachman, Jonathan
Jonathan.Bachman at mtsi-va.com
Wed Sep 23 13:15:11 CDT 2009
Don,
I am interested. I'm guessing the material you used was easy to work
with.
Jon
________________________________
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Don Johnston
Sent: Tuesday, September 22, 2009 3:42 PM
To: reflector at tvbf.org
Subject: REFLECTOR: Main Gear Brake Heat Shield
Jon,
I used a high-temp phelolic from McMaster-Carr (P/N 8641K122). The
minimum size is 12"x12" but you only need half that.
I still have the leftover from my sheet if you're interested.
-Don
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Bachman, Jonathan
Sent: Tuesday, September 22, 2009 11:05 AM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: Main Gear Brake Heat Sheild
What is the best way to add some protection to the main gear legs to
prevent overheating from the brake disks after heavy usage? My plane
has nothing, no shield, no wrap, and no AL tape. I've read about the
problems that overheating the gear leg can cause and I don't want to
have to go there.
Thanks
Jon Bachman
N956DR
Std RG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20090923/67444caa/attachment-0001.htm>
More information about the Reflector
mailing list