REFLECTOR: Rear cowl and scoop pictures

Scott Derrick scott at tnstaafl.net
Tue Sep 15 18:54:30 CDT 2009


Pictures of my rear cowling and induction scoop

This is with the lower cowl removed, the forward section of the scoop is
attached.  You can see the air servo to the right of the scoop sticking
down about 1.5 inches.

http://www.tnstaafl.net/canards/img166.jpg


this is a really bad picture looking from the rear past the servo into
the air filter, which fits into the forward portion of the scoop.  Its a
K&N cone filter.

http://www.tnstaafl.net/canards/img169.jpg

This if from the right side, with the lower cowling on, you can see the
induction box that is part of the cowl. It is fitted with an aluminum
ring that bolts to the servo.

http://www.tnstaafl.net/canards/img175.jpg

this is a shot from the rear looking into the filter housing which is
the forward section of the scoop. The door/piano hinge assembly at the
top of the picture is the alternate air door that is spring loaded.

http://www.tnstaafl.net/canards/img176.jpg

from the left rear side a shot with the rear section of the scoop installed

http://www.tnstaafl.net/canards/img177.jpg

same configuration from the left front looking back under the plane

http://www.tnstaafl.net/canards/img179.jpg

a bit further away from the plane and from the rear, the upper cowl is
not on

http://www.tnstaafl.net/canards/img180.jpg

Scott


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 260 bytes
Desc: OpenPGP digital signature
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20090915/0fc53d6c/attachment.pgp>


More information about the Reflector mailing list