REFLECTOR: Dynamic DC Motor Brake

[Douglas Holub]

Good info. My elevator trim is too touchy, also, and this has got to help. 
I'm going to try to find a DPDT momentary toggle switch that will allow me 
to short the motor terminals when the switch is in the middle position..

Doug Holub
----- Original Message ----- 
From: "Scott Derrick" <scott at tnstaafl.net>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Friday, September 11, 2009 10:02 AM
Subject: REFLECTOR: Dynamic DC Motor Brake


Here is the article on how it works and how to build one.

I had this on my plane before switching to the Strong Trim System(built
in brake) and it helped a lot.

Scott



--------------------------------------------------------------------------------


> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html