REFLECTOR: leveling question

Andrew Ellzey ajlz72756 at yahoo.com
Sat Oct 10 16:10:53 CDT 2009


Matt,

I used a water level and used the top two outboard wing bolt holes in the wing spar. The water level won't lie, I couldn't find any location that I could trust to be level by only using a standard level.
-------------------------------------------
Andy Ellzey


-- Original Message ----- 
  From: Matt Bucko 
  To: Velocity Aircraft Owners and Builders list 
  Sent: Friday, October 09, 2009 3:07 PM
  Subject: REFLECTOR: leveling question



  I have my lower half on jacks at the spar, and the nose on a saw horse. Time to bond in the gear.  I have a question an how to level left to right.  What i am finding is if I level the pilot spar, the CP spar is half a bubble off.  If I place the level on the top of the spar, fuselage centerline, then the outside of the spars are off.  I have the front to back leveled, but which point to I use for left/right?
  Matt


  __________ Information from ESET NOD32 Antivirus, version of virus signature database 4493 (20091009) __________

  The message was checked by ESET NOD32 Antivirus.

  http://www.eset.com



------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20091010/c0096703/attachment.htm>


More information about the Reflector mailing list