REFLECTOR: PUSHER PROP

Terry Miles terrence_miles at hotmail.com
Sun Nov 8 14:05:40 CST 2009 

I can't make the comparisons like others can.  It is my only experience.  That said.  I am happy with my Aerocomposite.  

Terry

LY IO540 300 HP

160 hours

 

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Rene Dugas
Sent: Sunday, November 08, 2009 14:35
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: PUSHER PROP

 

I asked myself what item's failure would kill my family or friends?  The list was long but what big items would I be embarassed about or worse, to have skimped on?  My answers:  Engine - remanufactured 0 time Lycoming IO-540, Garmin GPS and Com and the best prop I can afford. The Garmin 430 was $13,000 back when purchased it so the AeroComposite was only slightly higher than the new MT I flew for over three hundred hours. The MT was always beat up and I repaired it five times and repainted six times and had it totally rebuilt before I sold it because I was not comfortable selling it as is. I then asked myself why I tolerated the MT so long?  Because before the AC, it was the best I could do. We all ask these questions or should. Our answers differ but we live or die as pilots on each one of these. My family knows I build and fly with the best I can get and if I am found in a smoking hole it was probably my flying skills and not the plane or purchases that got me there. 

Your mileage will vary but three thousand more for the best I can get is certainly reasonable to me.

When I wrote the check I felt the pain but I'm still glad I did it.  Please check out the web site. It may be better than insurance. 

Rene' Dugas

Sent from my iPhone 3GS

 


On Nov 8, 2009, at 2:49 PM, "Lou Stedman" <stedmanlou at roadrunner.com> wrote:

I agree. 15K for 8 knots? 

----- Original Message ----- 

From: Andrew Ellzey <mailto:ajlz72756 at yahoo.com>  

To: Velocity Aircraft <mailto:reflector at tvbf.org>  Owners and Builders list 

Sent: Sunday, November 08, 2009 6:38 AM

Subject: Re: REFLECTOR: PUSHER PROP

 

Thats a lot of money to spend for a prop.

 

Andy

 


  _____  


From: Rene Dugas <dugasd at bellsouth.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Sat, November 7, 2009 5:33:29 PM
Subject: Re: REFLECTOR: PUSHER PROP

I think mine was 15 k. Lead was 4 months years ago. Gained 500 ft min climb and 8 knot at cruise. Blade cross section is much thinner and blades are MUCH STONGER.   I'm very pleased. I am unaware of specific testing for harmonics with my io 540 260 hp. 

Rene' Dugas

Sent from my iPhone 3GS 

 


On Nov 7, 2009, at 5:26 PM, Andrew Ellzey <ajlz72756 at yahoo.com> wrote:

Rene,

 

How much is a hydraulic AeroComposite prop for an XLRG 300hp IO540, and what is the normal lead time for delivery? Is the cruse speeds comparable to the MT. Has anyone done a harmonic vibration analysis on this prop airframe combination.

 

Andy Ellzey

 


  _____  


From: Rene Dugas <dugasd at bellsouth.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Wed, November 4, 2009 7:12:30 PM
Subject: Re: REFLECTOR: PUSHER PROP

I did the reverse.

Rene’

pics

 

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Darrell & Nora Kufalk
Sent: Wednesday, November 04, 2009 5:02 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: PUSHER PROP

 

I like my AeroComposites prop so much, I painted my entire airplane to match it.  :)

 

110 hours and going strong.

Darrell

 

 

----- Original Message ----- 

From: Rene Dugas <mailto:dugasd at bellsouth.net>  

To: 'Velocity <mailto:reflector at tvbf.org>  Aircraft Owners and Builders list' 

Sent: Wednesday, November 04, 2009 2:08 PM

Subject: Re: REFLECTOR: PUSHER PROP

 

Love my AeroComposite.  Please consider one.

Rene’

 

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Jmbmitch33
Sent: Wednesday, November 04, 2009 9:12 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: PUSHER PROP

 

I need a hydrolic MT and the MT that I was using has been working fine for just over 500+ hours.  If yours is hydrolic, what would you take for me to sweep it off your floor??..lol.  I would like to call you if you could give me your number...

 

Thanks

Mitch

----- Original Message ----- 

From: HYTEC45 at aol.com 

To: reflector at tvbf.org 

Sent: Wednesday, November 04, 2009 9:59 AM

Subject: Re: REFLECTOR: PUSHER PROP

 

In a message dated 11/3/2009 6:10:12 PM Pacific Standard Time, Jmbmitch33 at comcast.net writes:

Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any advice on where to look without breaking the bank?......Or, does anyone have another brand they like other than MT??

 

Thanks

M.Brown

What type, electric or hydraulic?  Is the engine counterweighted?  I have invested over 18K in my mt for my IO-360-C1C over the past 8 years with still no workable prop.  It sits again on my hanger floor fresh from overhaul with new blades and that is where it will stay.  Even though it's zero time at this point, I could not sleep at night pushing it off on someone.  I have come to the conclusion that the 180' firing pulses on the 360 (200hp) without counterweights are to violent for the bearing/seal design of the mt as this is what fails after approximately 40-50 hours.

Run Forest; Run!!

A friend with a cozy running a IO-360 is running the Aerocomposit with good results.

FYI,

TEC


  _____  


_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



CyberDefender has scanned this email for potential threats.
Version 2.0 / Build 4.03.29.01
Get free PC security at http://www.cyberdefender.com

  _____  

_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



CyberDefender has scanned this email for potential threats.
Version 2.0 / Build 4.03.29.01
Get free PC security at http://www.cyberdefender.com 

_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

  _____  

_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html 

  _____  


No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.425 / Virus Database: 270.14.55/2489 - Release Date: 11/08/09 07:37:00

_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20091108/046537e5/attachment-0001.htm>

More information about the Reflector mailing list