REFLECTOR: PUSHER PROP

[Andrew Ellzey]

Rene,

How much is a hydraulic AeroComposite prop for an XLRG 300hp IO540, and what is the normal lead time for delivery? Is the cruse speeds comparable to the MT. Has anyone done a harmonic vibration analysis on this prop airframe combination.

Andy Ellzey




________________________________
From: Rene Dugas <dugasd at bellsouth.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Wed, November 4, 2009 7:12:30 PM
Subject: Re: REFLECTOR: PUSHER PROP


I did the reverse.
Rene’
pics
 
From:reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Darrell & Nora Kufalk
Sent: Wednesday, November 04, 2009 5:02 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: PUSHER PROP
 
I like my AeroComposites prop so much, I painted my entire airplane to match it.  :)
 
110 hours and going strong.
Darrell
 
 
----- Original Message ----- 
>From:Rene Dugas 
>To:'Velocity Aircraft Owners and Builders list' 
>Sent:Wednesday, November 04, 2009 2:08 PM
>Subject:Re: REFLECTOR: PUSHER PROP
> 
>Love my AeroComposite.  Please consider one.
>Rene’
> 
>From:reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Jmbmitch33
>Sent: Wednesday, November 04, 2009 9:12 AM
>To: Velocity Aircraft Owners and Builders list
>Subject: Re: REFLECTOR: PUSHER PROP
> 
>I need a hydrolic MT and the MT that I was using has been working fine for just over 500+ hours.  If yours is hydrolic, what would you take for me to sweep it off your floor??..lol.  I would like to call you if you could give me your number...
> 
>Thanks
>Mitch
>----- Original Message ----- 
>>From:HYTEC45 at aol.com 
>>To:reflector at tvbf.org 
>>Sent:Wednesday, November 04, 2009 9:59 AM
>>Subject:Re: REFLECTOR: PUSHER PROP
>> 
>>In a message dated 11/3/2009 6:10:12 PM Pacific Standard Time, Jmbmitch33 at comcast.net writes:
>>Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any advice on where to look without breaking the bank?......Or, does anyone have another brand they like other than MT??
>>> 
>>>Thanks
>>>M.Brown
>>What type, electric or hydraulic?  Is the engine counterweighted?  I have invested over 18K in my mt for my IO-360-C1C over the past 8 years with still no workable prop.  It sits again on my hanger floor fresh from overhaul with new blades and that is where it will stay.  Even though it's zero time at this point, I could not sleep at night pushing it off on someone.  I have come to the conclusion that the 180' firing pulses on the 360 (200hp) without counterweights are to violent for the bearing/seal design of the mt as this is what fails after approximately 40-50 hours.
>>Run Forest; Run!!
>>A friend with a cozy running a IO-360 is running the Aerocomposit with good results.
>>FYI,
>>TEC
>>
________________________________

>>_______________________________________________
>>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>>
>>Visit the gallery!  www.tvbf.org/gallery
>>user:pw = tvbf:jamaicangoose
>>Check new archives: www.tvbf.org/pipermail
>>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
>CyberDefender has scanned this email for potential threats.
>Version 2.0 / Build 4.03.29.01
>Get free PC security at http://www.cyberdefender.com
>
________________________________

>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


CyberDefender has scanned this email for potential threats.
Version 2.0 / Build 4.03.29.01
Get free PC security at http://www.cyberdefender.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20091107/63bae687/attachment.htm>