REFLECTOR: PUSHER PROP

Rene Dugas dugasd at bellsouth.net
Wed Nov 4 19:12:30 CST 2009


I did the reverse.

Rene'

pics

 

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Darrell & Nora Kufalk
Sent: Wednesday, November 04, 2009 5:02 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: PUSHER PROP

 

I like my AeroComposites prop so much, I painted my entire airplane to match
it.  :)

 

110 hours and going strong.

Darrell

 

 

----- Original Message ----- 

From: Rene Dugas <mailto:dugasd at bellsouth.net>  

To: 'Velocity Aircraft <mailto:reflector at tvbf.org>  Owners and Builders
list' 

Sent: Wednesday, November 04, 2009 2:08 PM

Subject: Re: REFLECTOR: PUSHER PROP

 

Love my AeroComposite.  Please consider one.

Rene'

 

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Jmbmitch33
Sent: Wednesday, November 04, 2009 9:12 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: PUSHER PROP

 

I need a hydrolic MT and the MT that I was using has been working fine for
just over 500+ hours.  If yours is hydrolic, what would you take for me to
sweep it off your floor??..lol.  I would like to call you if you could give
me your number...

 

Thanks

Mitch

----- Original Message ----- 

From: HYTEC45 at aol.com 

To: reflector at tvbf.org 

Sent: Wednesday, November 04, 2009 9:59 AM

Subject: Re: REFLECTOR: PUSHER PROP

 

In a message dated 11/3/2009 6:10:12 PM Pacific Standard Time,
Jmbmitch33 at comcast.net writes:

Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any advice
on where to look without breaking the bank?......Or, does anyone have
another brand they like other than MT??

 

Thanks

M.Brown

What type, electric or hydraulic?  Is the engine counterweighted?  I have
invested over 18K in my mt for my IO-360-C1C over the past 8 years with
still no workable prop.  It sits again on my hanger floor fresh from
overhaul with new blades and that is where it will stay.  Even though it's
zero time at this point, I could not sleep at night pushing it off on
someone.  I have come to the conclusion that the 180' firing pulses on the
360 (200hp) without counterweights are to violent for the bearing/seal
design of the mt as this is what fails after approximately 40-50 hours.

Run Forest; Run!!

A friend with a cozy running a IO-360 is running the Aerocomposit with good
results.

FYI,

TEC


  _____  


_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



CyberDefender has scanned this email for potential threats.
Version 2.0 / Build 4.03.29.01
Get free PC security at http://www.cyberdefender.com 

  _____  

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



CyberDefender has scanned this email for potential threats.
Version 2.0 / Build 4.03.29.01
Get free PC security at http://www.cyberdefender.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20091104/c7d1691d/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 120506 002 small.jpg
Type: image/jpeg
Size: 170566 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20091104/c7d1691d/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Painted Velocity5.JPG
Type: image/jpeg
Size: 26632 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20091104/c7d1691d/attachment-0001.jpeg>


More information about the Reflector mailing list