REFLECTOR: Pusher Prop

Brooke Wolf bwolf1 at tds.net
Wed Nov 4 18:28:11 CST 2009


Darn nice looking airplane Darrell!  Goes good with the prop.  I  
ordered my AeroComposite a couple of weeks ago.

Brooke


>
> I like my AeroComposites prop so much, I painted my entire airplane  
> to match it.  :)
>
> 110 hours and going strong.
> Darrell
>
>
> ----- Original Message -----
> From:Rene Dugas
> To:'Velocity Aircraft Owners and Builders list'
> Sent:Wednesday, November 04, 2009 2:08 PM
> Subject:Re: REFLECTOR: PUSHER PROP
>
> Love my AeroComposite.  Please consider one.
> Rene’
>
> From:reflector-bounces at tvbf.org[mailto:reflector-bounces at tvbf.org]On  
> Behalf OfJmbmitch33
> Sent:Wednesday, November 04, 2009 9:12 AM
> To:Velocity Aircraft Owners and Builders list
> Subject:Re: REFLECTOR: PUSHER PROP
>
> I need a hydrolic MT and the MT that I was using has been working  
> fine for just over 500+ hours.  If yours is hydrolic, what would you  
> take for me to sweep it off your floor??..lol.  I would like to call  
> you if you could give me your number...
>
> Thanks
> Mitch
> ----- Original Message -----
> From:HYTEC45 at aol.com
> To:reflector at tvbf.org
> Sent:Wednesday, November 04, 2009 9:59 AM
> Subject:Re: REFLECTOR: PUSHER PROP
>
> In a message dated 11/3/2009 6:10:12 PM Pacific Standard Time,Jmbmitch33 at comcast.netwrites 
> :
> Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any  
> advice on where to look without breaking the bank?......Or, does  
> anyone have another brand they like other than MT??
>
> Thanks
> M.Brown
> What type, electric or hydraulic?  Is the engine counterweighted?  I  
> have invested over 18K in my mt for my IO-360-C1C over the past 8  
> years with still no workable prop.  It sits again on my hanger floor  
> fresh from overhaul with new blades and that is where it will stay.   
> Even though it's zero time at this point, I could not sleep at night  
> pushing it off on someone.  I have come to the conclusion that the  
> 180' firing pulses on the 360 (200hp) without counterweights are to  
> violent for the bearing/seal design of the mt as this is what fails  
> after approximately 40-50 hours.
> Run Forest; Run!!
> A friend with a cozy running a IO-360 is running the Aerocomposit  
> with good results.
> FYI,
> TEC
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/ 
> maillist.html
>
>
> CyberDefender has scanned this email for potential threats.
> Version 2.0 / Build 4.03.29.01
> Get free PC security athttp://www.cyberdefender.com
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/ 
> maillist.html
> <IMG_0484.JPG>
>
> _______________________________________________
> Visit the gallery!  tvbf:jamaicangoose

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20091104/e5519701/attachment.htm>


More information about the Reflector mailing list