REFLECTOR: Pusher Prop

Andrew Judge ajudge at grovenetworks.com
Wed Nov 4 10:32:19 CST 2009


I might, but after seeing some issues, I now have hesitations on selling
mine right awayL Mine is at the factory as I write...

 

Andy

 

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Dean Unterreiner
Sent: Wednesday, November 04, 2009 11:21 AM
To: Reflector
Subject: REFLECTOR: Pusher Prop

 

Anyone have a three blade fixed pitch for sale? I have an electric M&T
and am having the usual problems due to harsh harmonics so I will be
selling it if anyone is interested.
Dean 1-704-660-9849 

> From: reflector-request at tvbf.org
> Subject: Reflector Digest, Vol 66, Issue 4
> To: reflector at tvbf.org
> Date: Wed, 4 Nov 2009 09:57:38 -0600
> 
> Send Reflector mailing list submissions to
> reflector at tvbf.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.tvbf.org/mailman/listinfo/reflector
> or, via email, send a message with subject or body 'help' to
> reflector-request at tvbf.org
> 
> You can reach the person managing the list at
> reflector-owner at tvbf.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Reflector digest..."
> 
> 
> Today's Topics:
> 
> 1. PUSHER PROP (Jmbmitch33)
> 2. Re: PUSHER PROP (Andrew Judge)
> 3. Re: PUSHER PROP (Bill Werner)
> 4. Re: PUSHER PROP (HYTEC45 at aol.com)
> 5. Re: PUSHER PROP (Jmbmitch33)
> 6. Re: PUSHER PROP (HYTEC45 at aol.com)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Tue, 3 Nov 2009 21:08:23 -0500
> From: "Jmbmitch33" <Jmbmitch33 at comcast.net>
> Subject: REFLECTOR: PUSHER PROP
> To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
> Message-ID: <C15F0A0111CB4462923DB127A4BE509E at DBYBY971>
> Content-Type: text/plain; charset="utf-8"
> 
> Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any
advice on where to look without breaking the bank?......Or, does anyone
have another brand they like other than MT??
> 
> Thanks
> M.Brown
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20091103/26b5
9bb2/attachment-0001.htm>
> 
> ------------------------------
> 
> Message: 2
> Date: Tue, 3 Nov 2009 22:16:54 -0500
> From: "Andrew Judge" <ajudge at grovenetworks.com>
> Subject: Re: REFLECTOR: PUSHER PROP
> To: <reflector at tvbf.org>
> Message-ID:
> <1049DB5C87A08D4F9B0419B81419051A01365BB0 at gni-exch.grovenetworks.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Haven't seen one. Just received mine and have a 3-blade Performance
for sale soon...
> 
> Best regards, 
> 
> Andrew Judge 
> MCSE: Security, RHCE, ACHDS, ACTC, CSSA, CCA, NCIE, A+, Security+,
3Com VoIP, DCIE, VCP, VCI 
> CEO, Grove Networks Inc. 
> Microsoft Gold Certified Partner 
> Certified Apple Consultant Network Member 
> 3Com Voice Authorized Partner 
> Citrix Silver Solution Advisor 
> VMware Authorized Consultant 
> DataCore Authorized Business Partner 
> Phone: 305.448.6126 
> Fax: 305.437.7685 
> http://www.grovenetworks.com 
> 
> ________________________________
> 
> From: reflector-bounces at tvbf.org <reflector-bounces at tvbf.org> 
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org> 
> Sent: Tue Nov 03 21:08:23 2009
> Subject: REFLECTOR: PUSHER PROP 
> 
> 
> Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any
advice on where to look without breaking the bank?......Or, does anyone
have another brand they like other than MT??
> 
> Thanks
> M.Brown
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20091103/6d41
9a39/attachment-0001.htm>
> 
> ------------------------------
> 
> Message: 3
> Date: Tue, 3 Nov 2009 22:43:08 -0500
> From: "Bill Werner" <wwerner at earthlink.net>
> Subject: Re: REFLECTOR: PUSHER PROP
> To: "'Velocity Aircraft Owners and Builders list'"
> <reflector at tvbf.org>
> Message-ID: <005201ca5d00$ece89890$c6b9c9b0$@net>
> Content-Type: text/plain; charset="utf-8"
> 
> Check out www.barnstormers.com, I saw a couple when doing a search for
?MT propeller?
> 
> 
> 
> Bill
> 
> 
> 
> Still building??
> 
> 
> 
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]
On Behalf Of Jmbmitch33
> Sent: Tuesday, November 03, 2009 9:08 PM
> To: Velocity Aircraft Owners and Builders list
> Subject: REFLECTOR: PUSHER PROP
> 
> 
> 
> Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any
advice on where to look without breaking the bank?......Or, does anyone
have another brand they like other than MT??
> 
> 
> 
> Thanks
> 
> M.Brown
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20091103/6e3b
283c/attachment-0001.htm>
> 
> ------------------------------
> 
> Message: 4
> Date: Wed, 4 Nov 2009 09:59:45 EST
> From: HYTEC45 at aol.com
> Subject: Re: REFLECTOR: PUSHER PROP
> To: reflector at tvbf.org
> Message-ID: <bfd.679a571c.3822f0e1 at aol.com>
> Content-Type: text/plain; charset="us-ascii"
> 
> 
> In a message dated 11/3/2009 6:10:12 PM Pacific Standard Time, 
> Jmbmitch33 at comcast.net writes:
> 
> Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any 
> advice on where to look without breaking the bank?......Or, does
anyone have 
> another brand they like other than MT??
> 
> Thanks
> M.Brown
> 
> 
> 
> What type, electric or hydraulic? Is the engine counterweighted? I
have 
> invested over 18K in my mt for my IO-360-C1C over the past 8 years
with 
> still no workable prop. It sits again on my hanger floor fresh from
overhaul 
> with new blades and that is where it will stay. Even though it's zero
time 
> at this point, I could not sleep at night pushing it off on someone. I

> have come to the conclusion that the 180' firing pulses on the 360
(200hp) 
> without counterweights are to violent for the bearing/seal design of
the mt 
> as this is what fails after approximately 40-50 hours.
> Run Forest; Run!!
> A friend with a cozy running a IO-360 is running the Aerocomposit with
good 
> results.
> FYI,
> TEC
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20091104/8289
61d8/attachment-0001.htm>
> 
> ------------------------------
> 
> Message: 5
> Date: Wed, 4 Nov 2009 10:11:45 -0500
> From: "Jmbmitch33" <Jmbmitch33 at comcast.net>
> Subject: Re: REFLECTOR: PUSHER PROP
> To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
> Message-ID: <47F1BF2ED0414D3EA92284CC13D42B5E at DBYBY971>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> I need a hydrolic MT and the MT that I was using has been working fine
for just over 500+ hours. If yours is hydrolic, what would you take for
me to sweep it off your floor??..lol. I would like to call you if you
could give me your number...
> 
> Thanks
> Mitch
> ----- Original Message ----- 
> From: HYTEC45 at aol.com 
> To: reflector at tvbf.org 
> Sent: Wednesday, November 04, 2009 9:59 AM
> Subject: Re: REFLECTOR: PUSHER PROP
> 
> 
> In a message dated 11/3/2009 6:10:12 PM Pacific Standard Time,
Jmbmitch33 at comcast.net writes:
> Hello everyone, looking for a MT 3 blade prop for a LYC IO360....any
advice on where to look without breaking the bank?......Or, does anyone
have another brand they like other than MT??
> 
> Thanks
> M.Brown
> What type, electric or hydraulic? Is the engine counterweighted? I
have invested over 18K in my mt for my IO-360-C1C over the past 8 years
with still no workable prop. It sits again on my hanger floor fresh from
overhaul with new blades and that is where it will stay. Even though
it's zero time at this point, I could not sleep at night pushing it off
on someone. I have come to the conclusion that the 180' firing pulses on
the 360 (200hp) without counterweights are to violent for the
bearing/seal design of the mt as this is what fails after approximately
40-50 hours.
> Run Forest; Run!!
> A friend with a cozy running a IO-360 is running the Aerocomposit with
good results.
> FYI,
> TEC
> 
> 
>
------------------------------------------------------------------------
------
> 
> 
> _______________________________________________
> To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20091104/2c66
0d1c/attachment-0001.htm>
> 
> ------------------------------
> 
> Message: 6
> Date: Wed, 4 Nov 2009 10:52:12 EST
> From: HYTEC45 at aol.com
> Subject: Re: REFLECTOR: PUSHER PROP
> To: reflector at tvbf.org
> Message-ID: <d3e.4e353123.3822fd2c at aol.com>
> Content-Type: text/plain; charset="us-ascii"
> 
> 
> In a message dated 11/4/2009 7:14:42 AM Pacific Standard Time, 
> Jmbmitch33 at comcast.net writes:
> 
> I need a hydrolic MT 
> 
> 
> Mine is Electric and one of the first mt pushed for the Velocitys. 
> Sorry,
> TEC
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
<http://www.tvbf.org/mailman/private/reflector/attachments/20091104/17c4
61ef/attachment.htm>
> 
> ------------------------------
> 
> _______________________________________________
> Visit the gallery! tvbf:jamaicangoose
> 
> End of Reflector Digest, Vol 66, Issue 4
> ****************************************

________________________________

Windows 7: Unclutter your desktop. Learn more.
<http://go.microsoft.com/?linkid=9690331&ocid=PID24727::T:WLMTAGL:ON:WL:
en-US:WWL_WIN_evergreen:112009> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20091104/7a784377/attachment-0001.htm>


More information about the Reflector mailing list