REFLECTOR: CHT monitor

[Douglas Holub]

I wouldn't think there would be any ground leads involved with CHT probes. 
The wiring diagram for my RMI CHT probes uses a double pole rotary switch 
that successively sends both CHT leads from each probe to the engine 
monitor.

Doug Holub
5 hrs on N2980W, cylinders are cool, oil still hot
----- Original Message ----- 
From: <aminetech at bluefrog.com>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Tuesday, March 17, 2009 11:59 AM
Subject: REFLECTOR: CHT monitor


> I'm installing a digital CHT, single readout gauge using a Westach switch 
> to switch amoung the 6 cylinders.  The wiring that comes with the switch 
> connects all the grounds into a single lead.  I assume that is not a 
> problem?  Also, the ground wires are larger and I'm wondering why?
>
> John
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html